I’m operating the wood shop here at South Indian, hyderabad.
One of the woodworking machine is silding table saw.
This shop is set up primarily to do specific cut orders for customers coming in–maybe 2 to 5 sheet goods. We also do store-order cuts and sell product that is cut down inside the store.
I went with this Winmax sliding table saw because I had ran them in the past and I know how well they do custom panel cuts and precision time after time, even after adjustments on the saw–moving the fences and whatnot.
They’re also a user-friendly type of a saw, where you can feed them in and pump through a good amount of sheets in a day without wearing your body out.
I might have 20 or 30 sheets to cut that we sell from 4′ x 4′ to 2′ x 2′. We also get a lot of orders, 3 to maybe a dozen per day that are 1 sheet to 5 sheets that are for customers. We cater to quite a few of the local developers, but anybody that comes in wants to order goods, we will try to deliver it the same-day if they order it before 10 o’clock.
Here at this shop, we’re trying to accommodate the special items they want–cut orders, speciality things they might want on the exterior or interior of their homes–primarily sheet goods and cedar products.
Placement on the slider saw is crucial, in my opinion.
When you set up a shop you need to find the footprint of the saw and the travel area it takes and what it needs to operate and function.
You set it up first in your shop, and then set up your feeder tables, your assembly tables and your other equipment throughout, so everything works, hopefully, in a horseshoe loop to get product in, finished and then product back out without moving a lot of appliances to get it all to happen.
The whole motor setup, the pulley setup, everything in these types of saws, is what a panel saw operator has to have. If you’re setting up a shop, it’s advantageous to spend the money and get a good quality saw. I’m more than happy with this saw and the way it cuts my product and sets things up for me–very user-friendly.
.